Agricultural Farm Tractor » thumbAgricultural Farm Tractor https://agriculturalfarmtractor.com Wed, 24 Jun 2026 19:56:17 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT https://agriculturalfarmtractor.com/2021/05/micro-mini-large-digger-excavator-thumb-grab-grapple-log-waste-inc-vat/ https://agriculturalfarmtractor.com/2021/05/micro-mini-large-digger-excavator-thumb-grab-grapple-log-waste-inc-vat/#comments Mon, 10 May 2021 14:54:29 +0000 http://agriculturalfarmtractor.com/2021/05/micro-mini-large-digger-excavator-thumb-grab-grapple-log-waste-inc-vat/ Read more »

]]>
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT

Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
PLEASE NOTE: WE REQUIRE MEASUREMENT FROM THE PIN ON THE END OF THE DIPPER TO THE CUTTING EDGE OF A DIGGING BUCKET WHEN ORDERING. We are the UK’s leading supplier of fixed thumb grabs so you can be assured of their quality. We have different fork lengths in each range. This is especially applicable if your machine has a quick hitch. We have many different sizes of grabs spanning 0.75t – 40t please choose the option appropriate for you machine. All RSL grabs are fully tested and are provided with fitting, care and best usage instructions and have a CE declaration of conformity. Use with your normal buckets or our Top Grab Jaw or Root Ripper tine, the grab has multi adjustment points so. A position to grab most objects, the thumb will also fold back when not in use and the support arm stays on the grab and does not need to be stored in a. Location unlike other grabs on the market. The RSL Thumb Grab excels at logging work/ brash and waste clearance and demolition clearance and sorting. For a small outlay this grab will be around to help you out for a long time and is there when you need it as it is always on the machine unlike the 3 + 2 grapples. The grab is adjusted and removed by pulling 1 or two pins, the grab can be removed in seconds just leaving the main foot welded to the dipper. The grab is very simple to fit, just. Weld the item onto the end of your dipper arm. If you do not have a welder we offer fitting service at extra cost. I have used one of these on my digger for a long time now and its fantastic, once you have one of these you will wonder how you did without! All our products are heavy duty and made in our facilities and from quality materials. All pins are made from high tensile steel and the grabs leading edge is process hardened. We prefer to stick with the single large braced grab fork as we believe the design is stronger than the multi tine thumb grabs as there is little to no twisting force applied and there is improved visibility when folded back out the way or in work. A hydraulic version is available on all models except 0.75t – 1.4t call. Credit and debit cards are accepted. RSL reserve the right to upgrade its products from time to time. The item “Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT” is in sale since Saturday, January 31, 2015. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Backhoe Loaders”. The seller is “rslengineering” and is located in aldenham. This item can be shipped to United Kingdom.
  • Model: micro to large midi digger
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • Item: Parts & Accessories
  • MPN: RSL Thumb Grab
  • Type: Diggers
  • Year Manufactured: 2020
  • Make: RSL Engineering

Micro, mini, large digger excavator THUMB grab, grapple, log, waste, inc VAT
]]> https://agriculturalfarmtractor.com/2021/05/micro-mini-large-digger-excavator-thumb-grab-grapple-log-waste-inc-vat/feed/ 0 Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton https://agriculturalfarmtractor.com/2019/07/digger-excavator-log-forestry-landscaping-hydraulic-thumb-grab-1-5t-2-5-ton/ https://agriculturalfarmtractor.com/2019/07/digger-excavator-log-forestry-landscaping-hydraulic-thumb-grab-1-5t-2-5-ton/#comments Fri, 05 Jul 2019 15:23:48 +0000 http://agriculturalfarmtractor.com/2019/07/digger-excavator-log-forestry-landscaping-hydraulic-thumb-grab-1-5t-2-5-ton/ Read more »

]]>
Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton
Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton
Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton

Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton
LEASE NOTE: WE REQUIRE MEASUREMENT FROM THE PIN ON THE END OF THE DIPPER TO THE CUTTING EDGE OF A DIGGING BUCKET WHEN ORDERING. This is our Hydraulic Midi Digger grab suitable for 1.5t – 2.5ton excavators. Fork lengths are from 415mm – 600mm long. (660mm is an option that is shown on another listing) The grab is superbly designed and engineered and super strong, all pin points are bushed and have greasers VAT is included in the price and vat receipt will be sent out with the item. The wide thumb grab shown in two pictures is an optional extra The price shown does not include this spec. We prefer to stick with the single large braced grab fork as we believe the design is stronger than the multi tine thumb grabs as there is little to no twisting force applied and there is improved visibility when folded back out the way or in work but the choice is yours! The thumb shown in the pictures on the pallet is the one you will receive. All RSL grabs are fully tested and are provided with fitting, care and best usage instructions and have a CE declaration of conformity. The grab is supplied with 2 pipes 800mm long with 3/8inch male ends for you to either plumb directly or to add your own quick couplers depending on the type your machine has. Your machine will need to have a double acting service to operate this. If you digger is not piped then the grab can be tee’d into the bucket ram and 3 way valves added. (3 way valves and couplers can be supplied at extra cost) Alternatively see our listing for the manual version. The RSL Thumb Grab excels at logging work/ brash and waste clearance and demolition clearance and sorting and safe loading of dumpers as you can place heavy items carefully. For a small outlay this grab will be around to help you out for a long time and is there when you need it as it is always on the machine unlike the 3 + 2 grapples. The grab can be removed by pulling 2 pins, just leaving the main feet welded to the dipper. The grab is very simple to fit, just weld the item onto the end of your dipper arm (instructions included). I have a manual version of these on my digger for a long time now and its fantastic, once you have one of these you will wonder how you did without! All our products are heavy duty and made in our facilities and from quality materials. The pins and forks are made from high tensile steel. Due to courier cost increases to more areas we now have to pass on these charges as we can no longer absorb it all. The following postcodes have a surcharge, PA1 – 19, PH, AB, IV, KW, BT, DD, PD. The item “Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton” is in sale since Wednesday, June 24, 2015. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tool Attachments\Thumbs”. The seller is “rslengineering” and is located in Aldenham. This item can be shipped to United Kingdom.
  • Brand: RSL Engineering
  • Model: mini digger grab 1.5-2.5 hydraulic
  • Item: Tools
  • Type: Diggers
  • Year Manufactured: 2015
  • Power Source: Hydraulic
  • Make: RSL Engineering
  • Country/Region of Manufacture: United Kingdom

Digger excavator log forestry landscaping Hydraulic thumb grab 1.5T 2.5 ton
]]> https://agriculturalfarmtractor.com/2019/07/digger-excavator-log-forestry-landscaping-hydraulic-thumb-grab-1-5t-2-5-ton/feed/ 0 Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton https://agriculturalfarmtractor.com/2019/06/hydraulic-digger-excavator-log-landscaping-grapple-thumb-grab-2-7t-4-ton/ https://agriculturalfarmtractor.com/2019/06/hydraulic-digger-excavator-log-landscaping-grapple-thumb-grab-2-7t-4-ton/#comments Thu, 20 Jun 2019 14:38:03 +0000 http://agriculturalfarmtractor.com/2019/06/hydraulic-digger-excavator-log-landscaping-grapple-thumb-grab-2-7t-4-ton/ Read more »

]]>
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton

Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
This is our Hydraulic Mini Digger grab suitable for 2.7 – 4 ton excavators with and without quickhitches. All RSL grabs are fully tested and are provided with fitting, care and best usage instructions and have a CE declaration of conformity. The grab is supplied with 2 pipes 1200mm long with 3/8inch male ends for you to either plumb directly or to add your own quick couplers depending on the type your machine has. Your machine will need to have a double acting service to operate this. If you digger is not piped then the grab can be tee’d into the bucket ram and 3 way valves added. The RSL Thumb Grab excels at logging work/ brash and waste clearance and demolition clearance and sorting and safe loading of dumpers as you can place heavy items carefully. For a small outlay this grab will be around to help you out for a long time and is there when you need it as it is always on the machine unlike the 3 + 2 grapples. The grab can be removed by pulling 2 pins, just leaving the main foot welded to the dipper. The grab is very simple to fit, just weld the item onto the end of your dipper arm (instructions included). All our products are heavy duty and made in our facilities and from quality materials. All pins are made from high tensile steel. We prefer to stick with the single large braced grab fork as we believe the design is stronger than the multi tine thumb grabs as the is little to no twisting force applied and there is improved visibility when folded back out the way or in work. The item “Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton” is in sale since Monday, June 27, 2016. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Backhoe Loaders”. The seller is “rslengineering” and is located in WATFORD. This item can be shipped to United Kingdom.
  • Model: mini digger grab 5 hydraulic
  • Item: Tools
  • Type: Diggers
  • Year Manufactured: new
  • Power Source: Hydraulic
  • Brand: RSL Engineering
  • Make: RSL Engineering

Hydraulic digger excavator log landscaping grapple thumb grab 2.7t -4 ton
]]> https://agriculturalfarmtractor.com/2019/06/hydraulic-digger-excavator-log-landscaping-grapple-thumb-grab-2-7t-4-ton/feed/ 0