Before you read on we are a uk company we have most spares for the machine on the shelf we’re not based in Asia and you get support for your machine. Before you read on people wanting to make sawdust pellets this machine will make sawdust pellets but the moisture must be right 6mm die can be ordered. WE HAVE SPARES FOR THE MACHINES IN THE UK. Hammers and dies etc so you no you can get spares if you need them. Pellet mill 240v single phase 4kw single phase standard house supply 20 amp. Comes in green red or blue machine is same 4kw machine. Needs a cable to your electrical breaker or blue plug. Will do up to 120kg per hour on a big pellet smaller pellets 50-60kg hr we have a poultry farm and make our own feeds with the mills it saves a fortune especially on quail feeds and other small animals. Mixes are normally 70% grain such as wheat then 30% other products 1% edible oil so making your own feed is easy the oil speeds up production by lubricating the die fish oils are good for poultry that is what we use. If your looking for a pellet mill you know these are fairly priced. The machine comes with a 4mm die this is a standard size for chicken rabbits fish etc and is a good all round size. The different die sizes are suitable for. 2mm for quail small rabbits bantam chickens small fish and fishing baits etc. 3-4mm is for fish chickens horses donkeys cat biscuits fishing baits etc. 5mm for horses / pigs / cows /carp pellets / donkeys / cat biscuits. It will pellet any seed / straw / grass as long as it is not to wet or dry etc just put in mixed seeds or feed whole and the hammer smashed mixes then pelletises the mix no oil or additives required to make a pellet. Our machines have gone all over the world to. Cat and dog feed pellet. Comes on a pallet takes 3-5 days very heavy 150kg. The machine takes wear during normal use the machine comes with a. After 14 days we have all spares that can be supplied at cost.